DIY: Fabric Covered Clay Pot
Spring has sprung and it’s time think about the details of my 2013 garden. I’m a little limited in my garden options since I live in an apartment, but that doesn’t mean I can’t cultivate a cool and colorful floral outdoor space. My plan is to use post to plant a few herbs, succulents and rose bushes. Since my plants will sit on my patio in clay pots, I really wanted to make the pots special. I headed over to Pinterest for a little inspiration (of course) and found that Mod Podging fabric to pots was a thing! Check out this super chic and easy project. Pick your favorite fabric and truly make this project your own!
Materials: Clay Pot, Fabric, Mod Podge, Brush, Scissors
Cut a piece of fabric that is the length of your pot and a inch taller than your pot. You’ll need a little extra to tuck the fabric over and under your pot.
Cover your pot with a coat of Mod Podge
Wrap your fabric around your pot. Be sure there are no air bubbles under your fabric.
Tuck the ends of the fabric under the bottom of your pot and over the top of your pot. Apply a coat of Mod Podge to the top of your fabric to seal it in place.
Find your favorite Spring flowers and plant them in your new pot.
DIY: Tiered Mirror Cupcake Stand
My 30th birthday is 3 months away and party planning is in full effect (aka I’m already thinking about cupcakes!). I have no theme, no location, but I do know that my cupcakes will be resting on a beveled tiered mirror cupcake stand. Priorities!!!!! This project is so simple, so chic and the perfect addition to any party decor.
Materials: Beveled Mirrors (available at Michael’s) in 3 different sizes, Candle Holders (I scored these at $1 store but they’re also available at Target), Glue
Apply glue to the bottom and top of your candle stick holder
Starting with your largest mirror, place the candle holder in center of your mirror and allow the glue time to dry
Then, continue to stack your mirrors until your stand is the perfect height.
I also love the idea of this being a tiered jewelry stand. My girl Geneva from A Pair And A Spare made an adorable porcelain jewelry stand (here), but I think a mirrored one would be fun too!
DIY: Decorative Door Knob Wine Cork
While thrift shopping in Palms Springs this weekend I purchased a few fancy glass liquor containers (here). They’re very “Mad Men” if you will, but since I’m not much of a hard liquor drinker I was trying to figure out what else to fill them with. I’m more of a wine lover but that doesn’t mean the top of my wine bottles can be fancy either. This project is simple and makes the perfect gift.
Uncork your favorite bottle of wine.
Using the hole the bottle opener made in your cork, screw your door knob into place.
TIP: This might take a little effort so if need be use a pair of plyers to hold the knob in place and use your other hand to screw on the cork.
Now if for whatever reason you happen to not drink the entire bottle in one sitting (lol kidding obviously) you have a chic and glamorous way to recork your bottle and keep your wine fresh!
PS: In case you’re wondering Chateau St. Michelle (CSM to all the cool kids) is one of my favorite wines in the entire world! No lie, it’s so delicious (and they’re NOT paying me to say this either). It can be purchased at most local grocery stores ($6.99 with my Pavillions card) AND is often on the menu at some ritzy restaurants, so you seem real classy when you order it. If you haven’t yet experience the majesty that is CSM it’s time you get with the program. Try their riesling… you’ll love it! Enjoy responsibly… and by responsibly I mean at home, in your fanciest robe while watching reruns of the Golden Girls, Designing Women or some fab show like that!
DIY: Framed Fish Tank
I’ve been wanting to get a pet for some time now. I figured a fish would be a great starter pet! Plus a colorful Betta is a great and inexpensive way to add a little color to a room without pulling out the paint brush. I wanted a really decorative tank for my fish to live in. Since I always feel like I’m in an art museum when I stare at my Betta, I thought framing the tank would be a fun and creative idea to display my new moving art piece.
Materials: Rectangular Tank, Picture Frame, Mounting Tape, Aquarium Rocks, Aquarium Decor
Remove the back of your frame and apply your mounting tape.
Tip: Your picture frame should be the same size as your tank. A rectangular vase that you find at your local craft or floral store will make a great tank. Just be sure it’s at lease 2 -3 inches deep to give your fish wiggle room.
Decorate the inside of your tank with rocks, greenery or whatever aquatic decor that catches your eye. Remember this is the “picture” that will be visible in your frame so have fun with it!
My new fish really seems to be enjoying his new home. It’s bigger than that little bowl he’s been living in for the past few weeks and the plastic plant is quickly becoming his new BFF! Now it’s time to name him…
What should I name my new fish? If it were up to me I’d name him Elton, but thank goodness it’s not… I’m leaving it up to you guys! Leave any name suggestions in the comment section below and I’ll pick my favorite. If your name is chosen I’ll send you a little gift in appreciation! xo
DIY: Framed Fabric Inspiration Board
Don’t get me wrong Pinterest is a good time, but my inner magazine junkie gets a real thrill from physically ripping out those glossie pages and pinning them on a real life inspiration board. I like having a board in my work space that is bright, colorful and inspires me to be creative. Obviously a regular ole cork bulletin board just won’t do! This floral fabric covered frame board is just want I needed to decorate my space. And the best part is that it doubles as wall art!
Materials: A Frame, Fabric, Paint, Cardboard, Scissors, Stapler
Apply a coat of paint to touch up or change the color of your frame
Trace the back of your frame onto cardboard and use scissors to cut out your shape
Note: I used a cardboard display board as my base. It reminded me of my 4th grade Science project!
Cover the cardboard with your favorite fabric, pulling it as tight as possible and stapling it to the backside
Place the fabric covered board in the frame and hang it on the wall.
VIDEO: Clothing Hangers As Frameless Wall Art Displays
I love walls that are covered with family photos and colorful prints, but the thought of hanging a frame scares me. Who would have thought that clothing hangers would make such a refreshing option? I was able to make over my wall with the help of these wood pant hangers ($3 each from The Container Store) and clear thumb tacks. Cheaper and easier than hanging frames. Enjoy this little video and don’t forget to subscribe to the GNG YouTube channel!
VIDEO: Glitter ‘N Glue Accent Bowl
If you ever only craft one Glitter ‘N Glue DIY project let this be the one! This glitter accent bowl is a MUST for all girl obsessed with glitz. This project is so super simple that once you make one for yourself you’ll have to make one for your Mom, Sister, Aunt, Grandma, Cousin, Best Friend, Sorority Sister, the Mail Lady, your Gay Best Friend and so on and so forth (aka they make great gifts).
Enjoy the little video and don’t forget to subscribe to my YouTube channel!
VIDEO: Personalizing Your Doormat
Personalized welcome mat are genius! There’s no better way to bring a little personality to your doorstep. I hope you enjoy the little video of this fun and easy project. I’m loving this project and I might just be making one for my neighbor that reads “Hey Boo!”
Don’t forget to subscribe to my YouTube channel and give this video a thumbs up if you like the project. More videos coming your way in 20-13!!
DIY: Sequins ‘N Glue Christmas Ornament
Have you decorated your Christmas tree yet? Well the clear plastic ornament is THE craft material of the season. It’s a blank canvas that allows you to custom design and DIY your Christmas tree. This project is just one way (…of about a zillion) you could customize your ornament.
Materials: A Round Ornament, Sequin Trim, Glue
Apply a healthy amount of glue to the bottom or your ornament.
Place the end of the sequin trim in the glue and start wrapping. Continue to apply glue as you wrap around the ornament.
When you get to the top of your ornament, use your scissors and cut away any extra trim. Apply glue to the last sequin to be sure your trim is secure.
I used about 5 yards of trim to cover once ornament. At .50 cents per yard for trim plus the clear ornament ($1 from Michaels) this one ornament cost me about $3.50.
Fellow DIY blog Thanks, I Made It has complied a collection of crafty and creative DIY ornament projects from across the blogosphere including glitter ornaments, dipped ornaments, melted crayon ornaments and more! To view the full list click here.
DIY Decor: Picture Frame Serving Tray
My absolute favorite thing to do on the weekends is to curl up with a hot cup of coffee (hot chocolate during the Holidays) and get caught up on my reading (and my reading I mean all my fashion magazines). I have a fun little corner in my apartment with with a cozy chair that looks out the big bay window where I usually do my reading. After making a zillion trips between the kitchen and my reading space, I realize it would be so much easier if I had a little tray to transport my snacks and so little tray I made.
Materials: Memory Box or Picture Frame, Drawer Handles, Placemat



















